About Tar Sands
Basic information on tar sands, tar sands resources, and recovery of oil from tar sands.
What Are Tar Sands?
See the Photos page for additional photos of tar sand and tar sand mining.
Tar Sands Resources
See the Maps page for additional maps of tar sands resources in Utah.
Utah Tar Sands Estimated In-Place Resources
|Deposit||Known (MMB)||Additional Projected (MMB)|
|Tar Sand Triangle||2,500||420|
The Tar Sands IndustryCurrently, oil is not produced from tar sands on a significant commercial level in the United States; in fact, only Canada has a large-scale commercial tar sands industry, though a small amount of oil from tar sands is produced commercially in Venezuela. The Canadian tar sands industry is centered in Alberta, and more than one million barrels of synthetic oil are produced from these resources per day. Currently, tar sands represent about 40% of Canada's oil production, and output is expanding rapidly. Approximately 20% of U.S. crude oil and products come from Canada, and a substantial portion of this amount comes from tar sands. The tar sands are extracted both by mining and in situ recovery methods (see below). Canadian tar sands are different than U.S. tar sands in that Canadian tar sands are water wetted, while U.S tar sands are hydrocarbon wetted. As a result of this difference, extraction techniques for the tar sands in Utah will be different than for those in Alberta.
Recently, prices for crude oil have again risen to levels that may make tar-sands-based oil production in the United States commercially attractive, and both government and industry are interested in pursuing the development of tar sands oil resources as an alternative to conventional oil.
Tar Sands Extraction and Processing
See the Photos page for additional photos of tar sand processing facilities.
About two tons of tar sands are required to produce one barrel of oil. Roughly 75% of the bitumen can be recovered from sand. After oil extraction, the spent sand and other materials are then returned to the mine, which is eventually reclaimed.
In-situ production methods are used on bitumen deposits buried too deep for mining to be economically recovered. These techniques include steam injection, solvent injection, and firefloods, in which oxygen is injected and part of the resource burned to provide heat. So far steam injection has been the favoured method. Some of these extraction methods require large amounts of both water and energy (for heating and pumping).
Both mining and processing of tar sands involve a variety of environmental impacts, such as global warming and greenhouse gas emissions, disturbance of mined land; impacts on wildlife and air and water quality. The development of a commercial tar sands industry in the U.S. would also have significant social and economic impacts on local communities. Of special concern in the relatively arid western United States is the large amount of water required for tar sands processing; currently, tar sands extraction and processing require several barrels of water for each barrel of oil produced, though some of the water can be recycled.
For More InformationAdditional information on tar sands is available through the Web. Visit the Links page to access sites with more information.